BlueShadow Pump 40P – High-pressure dosing pump with 50 ml/min stainless steel pump head – APC40FA
Not sure which configuration is right for your application? Schedule a free consultation with our technical consultants today!
Schedule a consultationProduct Description
- Max. flow rate 50 ml/min
- Flow rate range 0.01 – 50 ml/min
- Flow rate increment 0.001 ml/min
- Maximum delivery pressure [psi] 4350 psi
- Maximum delivery pressure [MPa] 30 MPa
- Maximum delivery pressure [bar] 300 bar
- Pump head materials Stainless Steel
- Maximum viscosity 100 mPa·s
- Liquid temperature range 4−60 °C (39.2−140 °F)
- Gradient Isocratic
- 2-Year Warranty Included
The BlueShadow Pump 40P was designed to provide exceptionally precise and reliable solvent delivery for a wide range of HPLC and dosing applications. Exchangeable pump heads with maximum flow rates of 10 and 50 ml/min cover a wide range of high-pressure dosing tasks. Practically pulse-free flow is achieved by our enhanced smart drive control which actively prevents pressure ripple instead of just dampening it. The improved design ensures a low dead volume and the inline filter protects your column from clogging and pressure build-up.
Pump heads for high-temperature applications enable solvent delivery at up to 120°C. Minimize temperature gradients by adding a pump head heater and insulation sleeve.
General information
| Max. flow rate | 50 ml/min |
|---|---|
| Flow rate range | 0.01 – 50 ml/min |
| Flow rate increment | 0.001 ml/min |
| Maximum delivery pressure [psi] | 4350 psi |
| Maximum delivery pressure [MPa] | 30 MPa |
| Maximum delivery pressure [bar] | 300 bar |
| Pump head materials | Stainless Steel |
| Maximum viscosity | 100 mPa·s |
| Liquid temperature range | 4−60 °C (39.2−140 °F) |
| Gradient | Isocratic |
| Leak management | No |
| Wetted materials | GFP (graphite fiber reinforced PTFE), sapphire, ruby, stainless steel |
| Pump features | Piston seal wash, Purge valve (manual), RFID for automatic pump head detection, Standalone control and programming, Integrated pressure sensor, Active pulsation compensation |
Detailed information
| Best working conditions | 0.1 – 40.0 ml/min |
|---|---|
| Continuous working conditions | 0.1 – 20.0 ml/min |
| Flow rate accuracy | ± 1% |
| Flow rate accuracy conditions | measured at 5 – 80% of flow range using ethanol |
| Flow rate precision | < 0.1 % RSD |
| Flow rate precision conditions | based on retention time at constant room temperature |
| Degasser | No |
| Pulsation | < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi). |
| Piston seal washing | Active |
| System protection | soft start, Pmin and Pmax are programmable |
| Pump Outlet thread | Female UNF 10-32 (coned) |
| Pump head inlet (standard) | UNF 1/4-28 Thread |
| Pump head outlet (standard) | UNF 10-32 Thread |
Communication
| Interfaces | LAN, Pin header connectors (Analog IN, Start In, Error IN), LCD Display |
|---|---|
| Control | LAN, Analog and event control, |
| Analog inputs | Flow rate, 0 – 10 V via pin header connectors |
| Analog outputs | 8 event outputs (TTL, OC, Relais) and 24 V |
General
| Power supply | 100 – 240 V; 50 – 60 Hz; Maximum power consumption 40 Watt |
|---|---|
| Dimensions | 242 mm x 165 mm x 399 mm (W × H × D) |
| Weight | 5.1 kg |
| Leak sensor | No |
| Ambient conditions | 4–40 °C (39–104 °F) Air humidity: below 90 % humidity, non condensing |
| Weight | 1600 oz |
|---|---|
| Dimensions | 40 × 48 × 48 in |
| Manufacturer | |
| Instrument Type |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.